Natural additives with antioxidant properties can be used as biodegradable and sustainable alternatives to synthetic products, because they can inhibit the biodiesel oxidation reaction, increasing oxidative stability and extending its storage period. This research evaluated the efficiency of jabuticaba peels, gabiroba leaves, and hibiscus flowers in ethanolic extracts, analyzing through the simplex-centroid design, the induction periods (IP) and rate constants (k) of the biodiesel oxidation reaction at 110 °C. Antioxidant activity was observed in all extracts, either decreasing k or increasing the IP. The mathematical models obtained showed coefficients of determination greater than 0.9400, a non-significant lack of fit at the 5% level, and low dispersion between predicted and experimental data, indicating that the 1st order reaction fit was appropriate and can be used for predictive purposes. In this work, the optimization was performed with maximization of IP and minimization of k showing that the mixture containing 25% of jabuticaba peels extract and 75% of gabiroba leaves extract was the most suitable, because proportionally increased the IP and decreased k of the biodiesel oxidation reaction. It is possible to suggest the use of jabuticaba peels extract or gabiroba leaves extract as well as various combinations between them as antioxidant additives.

The objective of the present work was to apply self-organizing feature maps (SOFM) and multilayer perceptron (MLP) to evaluate the protective capacity of tert-butylhydroquinone (TBHQ), butylhydroxyanisole (BHA), and butylhydroxytoluene (BHT) antioxidants against the biodiesel oxidation reaction. For this, the antioxidant concentration and the biodiesel compliance parameters were used as continuous input variables and the type of antioxidant as a categorical. The SOFM proved to be an adequate tool for the classification of biodiesel samples containing antioxidants. The performance of the 5 most active networks of the model ranged from 89 to 99% for training, testing, and validation with an error below 1.42 × 10-4. Statistical tests applied to validate the model showed no significant difference between predicted and experimental values. The global sensitivity analysis showed that the relative protection factor (RPF) contributed with 34.89%, the antioxidant with 31.49%, the induction period with 10.69%, the water content with 6.00%, and the others all together with 16.93% in the construction of the regression models by MLP.

The simultaneous diffusion of inorganic components in the olive pulp in wet brine was modeled based on Fick’s generalized 2nd Law and simulated using the finite element method. The main and crossed diffusion coefficients, the film coefficient and the Biot number were determined, with the application of the simplex optimization method, through the minimization of the percentage errors. The errors between the simulated and experimental data were 5.35% for NaCl and 4.77% for KCl and the adjusted main diffusion coefficients were 0.4358 × 10-12 m2 s-1 for NaCl and 0.5408 × 10-12 m2 s-1 for KCl. The system developed to simulate diffusion allows the control and modulation of the salts content that diffuses through the olive pulp.

Olive samples were subjected to the salting process in brine containing 1196 mol m−3 of NaCl and 402 mol m−3 of KCl. Samples were collected during 60 h and salt concentration values were determined. With the finite element method (FEM) and the minimization of the errors percentage between the simulated and experimental values, the mass transfer coefficients in the film (hm) were obtained, being 1.0072 × 10−8 and 1.2499 × 10−8 for NaCl and KCl, respectively. The salts concentration at the olive/brine interface was simulated by FEM and analyzed via SOFM. A network with 4 × 4 topology and 10000 training epochs was used. It was observed that the influence of the stationary film formed on the surface of the olives during the salting process depends on the position, the salt involved in the diffusion and that the concentration of the salts, at each point, varies according to the immersion time.